2020 INTERNATIONAL CV - Sold

2020 International, CV515 4×4 SBA with Non-CDL GVWR of 19,500 lbs is Powered by International’s time-tested V8 Diesel 6.6 litre Turbo-Charged engine. Many of you may be familiar with this cross branded multi-platform engine already, and aware of it’s rugged and durable legacy. The CV515 chassis platform utilizes this powerhouse engine with the venerable Allison 6-Speed transmission with available PTO capability to power through the most demanding duties. The tough and capable full-length straight C-Channel commercial truck frame is one robust piece of steel from tip to tail and is the in class-leading and only one of its kind in the industry. Four-Wheel-Drive versions include an all-gear transfer case to reliably get motive traction to all four corners – no chain drive sprocket sets in this engineering marvel! Front drive axles are solid and straight, as a heavy duty commercial truck should be!Other notable features include: Anti-Lock Brakes with Traction Control; 3 Passenger seating; 40 gallon fuel tank; Power Windows/Locks/Mirrors; Am/FM Stereo with Bluetooth capability; True upfitter switch package; Cruise Control; Air Conditioning. Body equipment includes: Knapheide 6132DLR-44K: 11 ft crane body with torq-isolator crane support system. A-40 galvanneal compartments and doors, 3/16” treadplate floor, 1/8” tops and backs, full-seam continuously welded. 12 gauge bottom and end panels of compartments and double panel 14 gauge outside panels. Exclusive 12 stage K-coat protection includes 12 stages of cleaning, pre-treat, electrodeposition prime coat, rinse, and curing. Stellar 7621 Service Crane: 7,500lbs lift capacity (38,000ft-lbs.), 21′ hydraulic reach, planetary winch 60’/min speed, and double-acting cylinders w/integral holding valves. Filters, crane hook, snatch block, anti-two block device & hydraulic shutdown, 3/8″ cable, boom support, wireless remote control (RF) with back up pendant control, PTO, hydraulic pump for crane, hydraulic reservoir with guard, and remote docking / charge station for crane remote Outriggers: Hydraulic out / hydraulic down at curbside and hydraulic down at street side Control Panel: Power Cell, controller and (8) button switch panel in the rear crane compartment. CAN-bus system with continuous working load of 115 amps, features built in overload current protection for the system and operator safety. 4-button keypad installed in cab; Hydraulic Air Compressor: Boss 40 CFM hydraulic compressor with Reel craft 50’x ½” hose reel and roller fairlead through the right rear compartment. FLR system and underbody air tank included with compressor. Side Compartments: 44″ high side packs and 60″ high right front vertical compartment with automotive quality 3-pt T-handles